original kit directions

Prep your Shoes

Remove shoelaces, and use provided Sneaker Wipe to remove any excess dirt or debris from sneaker.

Cleaning Process

1. Prepare a small bowl with approximately 4 oz. of water and add two squirts of our powerful sneaker-cleaning solution.

2. Dip the Medium Bristle Brush into the cleaning solution to unlock its full potential.

3. Start gently creating a lather on the shoe's upper part using the brush while cleaning the materials.

4. Move on to the midsole and undersole, using the Medium Bristle Brush and solution scrub to loosen dirt and clean shoe.

5. Pat your shoes dry with a towel, feel free to repeat any steps as needed for desired results.

6. Allow your reshoevn8ed shoes to dry overnight in a well-ventilated area for maximum freshness.

essential kit directions

Prep your Shoes

Remove shoelaces, and wipe or brush off any excess dirt or debris from sneaker.

Cleaning Process

1. Prepare a small bowl with approximately 4 oz. of water and add two squirts of our powerful sneaker-cleaning solution.

2. Dip the Soft Bristle Brush into the cleaning solution to unlock its full potential.

3. Start gently creating a lather on the shoe's upper part using the Soft Bristle Brush. For stubborn stains, rely on the Medium Bristle Brush to work its magic.

4. Move on to the midsole and use the Medium Bristle Brush to loosen dirt, followed by the Stiff Bristle Brush for a deep and thorough clean.

5. Pat your shoes dry with the provided Microfiber Towel, feel free to repeat any step.

6. Allow your reshoevn8ed shoes to dry overnight in a well-ventilated area for maximum freshness.

Costco Kit directions

Prep your Shoes

Remove shoelaces, and wipe or brush off any excess dirt or debris from sneaker.

Directions

CLEAN:
1: Fill a small bowl with approx. 4oz. of water, and add 2 squirts of RESHOEVN8R Cleaning Solution into bowl.

2: Immerse the Soft Bristle Brush into the bowl solution.

3: Being gently creating a lather on the upper part of the shoes. If necessary, repeat the process using the Medium Bristle Brush to remove more stubborn stains.

4: Proceed to the midsole of the shoe, use the Medium Bristle Brush to loosen the dirt, and gently follow up with the Stiff Bristle Brush for a deeper clean.

5: Using the Microfiber Towel, pat your shoes dry; if needed, repeat the steps above.

6: Place your shoes in a well ventilated area to ensure freshness, and allow them to dry overnight before wearing.


PROTECT**:
1: If shoes are dirty, clean shoes with RESHOEVN8R following the steps above prior to using protective repellent.

2: In a well ventilated area* apply 2 even coats 6-8 inches from your shoes. Allow 5-10 minutes to dry in between applications.

3: Allow to dry for at least 15 minutes prior to wearing.

** Not recommended for use on leather.

DEODORIZE:
1: Spray Deodorizer spray inside each shoes 2-3 times.*

2: Allow time to dry prior to wearing.

* To maintain a fresh, clean smell, use 2-3 times weekly.

Signature kit directions

Prep your Shoes

Remove shoelaces and insert the Shoe Trees to maintain the shoe's shape during the cleaning process.

Pretreat or Quick Clean 

1. Apply a small amount of the Cleaning Solution (2 squirts) into a bowl filled with approximately 4oz of water. 

2. Using the soft Bristle Brush gently scrub the shoe's upper part, paying attention to stains and dirt.

3. If needed, switch to the Medium Bristle Brush to address tougher stains.

4. Use the Stiff Bristle Brush for a deep clean on the soles and midsoles.

Deep Clean (Sneaker Laundry System)

For a thorough cleaning using the Laundry System, follow the same steps from above, then proceed to these steps below :

1. Place the shoes into the Sneaker Laundry Bag with soles together.

2. Close the bag securely, ensuring the shoes are enclosed.

3. Add detergent, we recommend using Reshoevn8r’s sneaker-specific laundry pods to ensure an effective clean and conditioning. If using another brand please use a noncolor pod or liquid detergent. 

4. Place the Sneaker Laundry Bag into the washing machine. 

5. Set the washing machine to normal cycle with cold water and press start.

6. Once the cycle is complete, remove the shoes from the bag and let them air dry with shoe trees still inside in a well ventilated area. Do Not use a dryer, as it will damage the shoes.

7: Relace and admire your reshoevn8ed shoes. 

WATER AND STAIN REPELLENT directions

Directions

1. If needed, clean shoes with Reshoevn8r Cleaning Kit prior to applying Water And Stain Repellent.

2. In a well ventilated area, hold can upright and apply even coats, 6-8 inches away from the surface.

3. Allow to dry 15 minutes.

4. Repeat these steps for 3 coats.

* We recommend reapplying every 3-6 weeks depending on amount of wear, or after each clean.

COMPATIBLE MATERIALS

Suede, nubuck, mesh, light colored leather, knit, canvas.

*Do not use on dark colored or patent leather


SNEAKER WIPES directions

Directions

1. Tear open package.

2. Gently wipe shoe with smooth side of Sneaker Wipe.

3. If dirt or grime remains on shoe, flip Sneaker Wipe over to textured side and wipe.

4. Repeat above steps until desired results.

NOTE

Not recommended for suede, or nubuck materials.

SOLE SHIELDS directions

additional items needed

To properly install these, you will need a pen, a pair of scissors, and a heat gun.

Installation Process

1. On a clean sole, use supplied cleaning pad and wipe the bottom of the shoe.

2. With a pen carefully trace the bottom of the shoe onto the smooth side of the Sole Shield. (textured side down)

3. Using scissors, cut the Sole Shields out following your trace lines.

4. Peel the backing off of the Sole Shields.

5. With the adhesive side down, align the Sole Shields evenly across the bottom of the shoe.

6. Apply light pressure, molding the Sole Shield into the grooves of the bottom of the shoe.

7. Use the heat gun and apply heat while continuing to mold the Sole Shields in the grooves of the sneaker while ensuring a firm bond.

8. Repeat these steps on the other sneaker.

CREASE PROTECTOR directions

IDENTIFY

The crease protectors are marked with L and R for LEFT and RIGHT sneakers on the underside. Identify which is which prior to installing.

Installation

1. Loosen laces and remove the insoles if possible.

2. Slide the Crease Protector into the toe box of the sneaker, and reinsert insole.

3. Place foot in shoe and check alignment and comfort.

4. Adjust Crease Protector to fit and for comfort as needed.

REMOVAL

To remove, take out the insole and squeeze the back tabs of the Crease Protector together and slide out of the sneaker. Replace the insole.

Cleaning Solution directions

Prep Your shoes

Remove shoelaces, and wipe or brush off any excess dirt or debris from sneaker.

DIRECTIONS

1. Fill bowl with 4 oz of water and add 2 squirts of Reshoevn8r Cleaning Solution.

2. Dip appropriate brush into mixture and scrub shoe to create a lather.

3. Repeat step 2 unit desired results are achieved.

4. Wipe shoe with a clean towel and allow to air dry.

CLEANING MAT directions

DIRECTIONS

1. Place mat down on top of surface prior to cleaning to absorb excess water & solution during cleaning process.

After Use

Machine wash separately with warm water and detergent. Tumble dry on low heat.

MICRO FIBER TOWEL directions

DIRECTIONS

1. Use to wipe off suds during a cleaning, wipe off unwanted scuffs, and clean up your mess after cleaning.

2. Repeat as needed to achieve desired results.

After Use

Machine wash separately with warm water and detergent. Tumble dry on low heat.

SNEAKER LAUNDRY BAG DIRECTIONS

DIRECTIONS

1. Use a Reshoevn8r Cleaning Kit to pre-clean the sneakers.

2. Ensure the Reshoevn8r shoe trees are inserted into sneakers prior to placing into Sneaker Laundry Bag.

3. Pull strings to loosen the bag to allow sneakers to fit inside.

4. Place 2 sneakers (up to size 12) soles together, and heel to toe.

5. Slide sneakers into Sneaker Laundry Bag.

6. Pull strings to tighten the bag to the sneakers, and ensure the strings are locked in place by pushing the circle down on the sliders.

7. Insert shoelaces and 1x laundry pod into the pouch of the bag.

8. Secure pouch with button and clasp.

9. Place sneakers into washing machine.

RECOMMENDED MATERIALS

Knit, mesh, nylon, canvas, and similar. We do not recommend using with dyed suede.

LAUNDRY PODS directions

DIRECTIONS

1. Using Reshoevn8r Cleaning Kit to pre-clean the sneakers.

2. Ensure the Reshoevn8r shoe tree is inserted into sneaker prior to placing into Sneaker Laundry Bag.

3. Add single laundry pod into the pouch of the laundry bag.

4. Place sneakers into washing machine, and run on normal cycle with cold water.

5. Once wash cycle completed, remove sneakers and place in sun to completly dry.

RECOMMENDED MATERIALS

Knit, mesh, nylon, canvas, and similar. We do not recommend using with dyed suede.

DEODORIZER SPRAY directions

DIRECTIONS

1. Spray 2-3 pumps into each sneaker, 2x a day until odor is eliminated.

2. Allow amble time to dry prior to wearing.

Maintenance

To maintain deodorization, spray 2-3 times per week.

SHOE TREES DIRECTIONS

SIZING

Fit sizes US Men's 7 to 13

Directions

1. Adjust the shoe tree to the proper size by pinching the metal prongs together and remove from the holes.

2. Replace the prongs into the proper holes to fit the sneaker you are cleaning. You may need to re-adjust a few times to get the sizing proper.

3. Lock the shoe tree into the sneaker by pushing down until the shoe tree shoe is flat into the sneaker.

4. To remove, simply pull up on the shoe tree and pull out of the shoe.

DRY SUEDE CLEANING KIT directions

DISCLAIMER

This cleaning kit is designed specifically for suede materials. Using this dry cleaning process the Dry Suede Kit removes most marks and scuffs.

Directions

1. Using the provided brush, use on the blemished suede area to remove any and all excess dirt.

2. Using the provided eraser, rub end on area to remove dirt, stains, and scuffs. Repeat until desired results are achieved.

3. Using the brush provided, dry brush the area to remove eraser shavings and reset the nap and texture of the suede.

DRYING RACK & BOWL directions

Directions

1. Remove top of drying rack and bowl combo to use as a bowl.

2. Add 4oz of water to bowl for a single cleaning session.

3. Place brushes gently on the bottom section during the cleaning process to allow them to properly dry.

4. Drain, rinse, and dry bowl when completed.

NOTE

After cleaning is finished, let the brushes sit overnight to completely dry. Before placing lid (bowl) on drying rack for storage ensure the bowl, rack, and brushes are completely dry to avoid mold.

3 BRUSH PACK directions

Directions

1. Soft Bristle Brush is great for delicate materials as well as the cleaning the uppers of any shoe. Including the tongue and sock liner. It will create the most lather and break down dirt and debris on most surfaces.

2. Medium Bristle Brush is great for midsoles and some harder to clean spots after the Soft Bristle Brush - be mindful of delicate materials when using this brush.

3. Stiff Bristle Brush is used for the outsole (undersole) of the sneakers only. This is an abrasive brush and you want to use it on materials that will not be damaged by it.

4. After using, allow 24 hours for your brushes to fully dry prior to storing to prevent damage or mold.

NOTE

These brushes can be used on any material. Note, when cleaning suede it is important to clean the sneaker evenly and do not oversaturate the material. Use discretion when picking the brush to use.

brass bristle brush directions

Directions

1. Start with a clean sneaker, if not please use Reshoevn8r Cleaning Kit as needed.

2. Apply the brush to only the suede part of the sneaker and lightly brush back and forth to restore the texture of the suede. There is not a lot of pressure needed to do this.

3. Make sure to not touch any leather or press too hard on the sneaker. This can create bald spots on the suede or scratch the leather.

4. Repeat as needed for desired results.

NOTE

This is ONLY recommended for suede and nubuck materials. Do NOT use on leather, mesh, canvas, knit, etc. materials.

mink oil directions

Directions

1. If needed, clean shoes with Reshoevn8r Cleaning Kit prior to applying Mink Oil.

2. In a well ventilated area, hold can upright and apply one light coat, 6-8 inches away from the surface.

3. Immediately brush into material using Reshoevn8r Horse Hair Brush to evenly distribute Mink Oil.

4. Allow 5-10 minutes to properly dry.

5. If needed, repeat the process.

NOTE

Do not oversaturate the materials.

sole revive directions

Additional Items Needed

In addition to Sole Revive, you will need to have available to you: saran wrap / plastic wrap, latex gloves, UV lights or the sun.

Directions

1. Start with a clean sneaker by utilizing any Reshoevn8r Cleaning Kit.

2. Make sure you are wearing latex gloves.

3. Apply Sole Revive directly to the soles of the sneakers. Do not get Sole Revive on any non rubber surface as it will permanently damage it.

4. Use the brush supplied and spread the Sole Revive around evenly. Avoid any painted or non white/clear colored midsole or undersole areas.

5. Place the plastic wrap down on the surface and put the shoe on top of it and wrap the shoe to ensure Sole Revive stays on the soles.

6. If you have a UV tent, place inside. If not, place outside in the sunlight.

** The duration in the UV tent or sunlight, and amount of times you will need to reapply Sole Revive will depend on the severity of oxidation.

horsehair brush directions

Directions

1. Lightly use brush to apply Mink Oil into a sneaker to condition the leather or restore faded suede.

Item Pairing

Reshoevn8r Mink Oil